Epson 3000 - Manuel (Page 214)

For Macintosh users:
1. Make sure paper is loaded in the sheet feeder.
c
Caution:
Use paper at least 210 mm (8.27 inches) wide; for example,
A4 size paper loaded short edge first. Otherwise, the print
head will spray ink directly onto the platen.
2. Open the printer driver and choose Utility from the Print
dialog box. You see the Utility dialog box.
3. Click the Print Head Alignment button.
4. Follow the messages on your screen to align the print heads.
Using the print head alignment utility for DOS
The print head alignment utility includes both black and color
alignment features. To install this utility on your hard drive,
insert the EPSON Printer Software CD-ROM into your
CD-ROM drive and then type D:\SETUP (If your CD-ROM
drive uses a different drive letter or you are using the floppy
version, substitute it for D:\) at the DOS prompt. Follow the
directions on the screen. After running the setup program,
change to the drive and directory that contains the utility (or
set the path to the directory). Then type EPCALIB and press
Enter
. The following window appears:
calibl2
L Loire-P Ref. Guide
Rev.c
A5 size Chapter 8
02-24-97 DR, pass 0
8-42 Troubleshooting