Epson 3000 - Manuel (Page 150)

3. Take out the front edge of the banner paper from the manual
feed slot and position the front edge so that the paper
remains completely out of the feed slot.
Note:
If you do not use the remaining banner paper for a while, return the
banner paper roll to its original package. Unfavorable storage
conditions such as high temperature, direct sunlight, or humidity can
damage the paper.
EPSON Ink Jet Back Light Film
When printing on EPSON Ink Jet Back Light Film, note the
following:
❑ You can load only one sheet at a time into the sheet feeder
or the manual feed slot.
❑ The EPSON Ink Jet Back Light Film tends to curl even
under nomal storage conditions. If it curls, flatten it before
you load the film.
❑ Make sure to load the film with the printable side down
when loading the film into the sheet feeder, or with the
printable side up when loading the film from the manual
feed slot.
❑ Before sending data, select Ink Jet Back Light Film as the
Media Type setting on the Main menu in the printer driver.
Note:
EPSON Ink Jet Back Light Film is designed to print images
backwards, using the printer driver’s Flip Horizontal feature, so that
viewing the printout from the unprinted side gives the correct image.
To use the Flip Horizontal feature, select Ink Jet Back Light Film as
the Media Type or select Flip Horizontal, but do not select both.
L
Loire-p Ref. Guide
Rev.c
A5 size Chapter 5
02-24-97 DR, pass 0
5-34 Paper Handling