Epson 3000 - Manuel (Page 186)

Print speed is not what you expect.
Cause What to do
The image resolution and the
amount of color used in the
document may be too high. Carefully considering your use of color
and resolution can help you optimize
your printing times. For more details,
see “Increasing the Print Speed” later
in this chapter.
Note:
High resolution printing and color
printing significantly increase the amount
of data to be processed. These two factors
have the greatest effect on print speed.
Something on the page is wrong or missing.
Cause What to do
Unknown problem has
occurred. Disconnect the interface cable from
the computer; then try the self test as
described on page 8-5.
The printer settings within
your application are
incorrect. Adjust the printer settings within your
application and print again.
The interface cable is not
plugged in securely. Check that both ends of the cable
connecting the printer and the
computer are securely plugged in.
The data transfer speed does
not match your computer. Set Parallel I/F (interface transfer rate)
setting to Normal in the default-setting
mode. See “Changing the default
settings” on page 6-10.
L Loire-P Ref. Guide
Rev.c
A5 size Chapter 8
02-24-97 DR, pass 0
8-14 Troubleshooting