Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 133)

Rockwell Automation Publication 1440-UM001C-EN-P - May 2014 133
CIP Objects Appendix B
Services
(1) Attributes can only be set while the device is in Program mode. See the description of the Device Mode Object for more information.
Acknowledge Handler
Object (Class ID 2BH) The Acknowledge Handler Object is used to manage the reception of message
acknowledgments. This object communicates with a message producing
Application Object within a device. The Acknowledge Handler Object notifies
the producing application of acknowledge reception, acknowledge timeouts, and
production retry limit errors.
Class Attributes
The Acknowledge Handler Object provides no class attributes.
3
Get
Link Path ARRAY of
DeviceNet path DeviceNet path to the object for
the Parameter value.
Segment Type/Port BYTE See DeviceNet Specification
Volume 1 Appendix I for format.
Segment Address See DeviceNet Specification
Volume 1 Appendix I for format.
4 Get Descriptor WORD Description of Parameter Bit 0 = Settable Path support
Bit 1 = Enum Strings support
Bit 2 = Scaling support
Bit 3 = Scaling Links support
Bit 4 = Read Only
Bit 5 = Monitor
Bit 6 = Ext. Prec. scaling
5 Get Data Type EPATH Data Type Code See DeviceNet Specification Volume 1
Appendix J, Section J-6.
6 Get Data Size USINT Number of Bytes in Parameter
value.
Table 49 - Parameter Object Instance Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
Table 50 - Parameter Object Services
Service Code
Class/Instance Usage Name Description
0E
h
Class/Instance Get_Attribute_Single Returns the contents of the specified
attribute.
10
h
Class Set_Attribute_Single Sets the contents of the specified
attribute.
(1)