Rockwell Automation 1440-SDM02-01RA XM-124 Standard Dynamic Measurement Module - Manuel (Page 118)

118 Rockwell Automation Publication 1440-UM001C-EN-P - May 2014
Appendix B CIP Objects
Instance Attribute
Services
Assembly Object
(Class Code 04
H
)
The Assembly Object binds attributes of multiple objects to allow data to or from
each object to be sent or received in a single message.
The XM-124 module provides both static and dynamic assemblies.
Class Attribute
Table 28 - DeviceNet Object Instance Attributes
Attr ID Access Name Data Type Default Value
1 Get MAC ID USINT On DIP switches under label
2 Get Communication Rate USINT The communication rate is determined by automatic
communication rate detection (autobaud). The module
listens to network traffic to determine the
communication rate before it goes online.
3 Get Bus-Off Interrupt BOOL 0
4 Get/Set Bus-Off Counter USINT 0
5 Get Allocation Information STRUCT of BYTE
USINT 0…255
6 Get MAC ID switch changed BOOL 0 = No change
1 = Change since last reset or powerup
7 Get Communication rate switch
changed BOOL 0 = No change
1 = Change since last reset or powerup
8 Get MAC ID switch value USINT 0…99
9 Get Communication rate switch
value USINT 0…9
100 Get Autobaud Disable BOOL 0 (always autobaud)
Table 29 - DeviceNet Object Services
Service Code
Class/Instance Usage Name
0E
h
Class/Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single
4B
h
Instance Allocate_Master/Slave_Connection_Set
4C
h
Instance Release_Group_2_Identifier_Set
Table 30 - Assembly Object Class Attributes
Attr ID
Access Rule
Name Data Type Description Semantics
1 Get Revision UINT Version of the implemented
object. 2