Sony MHC-3600 - Manuel (Page 64)

Specifications Spécifications
(For U K. and Australia)
For satellite speaker
20 -r 20 watts (8 ohms at
1 kHz. DIN)
2S -k 25 watts (8 ohms at
1 kHz. 5% THO)
For bass speaker:
30 k- 30 watts (6 ohms at
110 Hz. DIN)
35 k 35 watts (6 ohms at
110 Hz. 5% THD)
M usic power output (tor U K model)
For satellite speaker
35 + 35 watts (8 ohms at
1 kHz. 10% THD)
For bass speaker:
50 + 50 watts (6 ohms at
110 Hz. 10% THD)
Peak music power output (for Australian model)
450 watts
Inputs MIX MIC (miniiack):
sensitivity 1 mV.
impedance 600 ohms
Outputs HEADPHONES
(stereo mimiack):
accepts headphones ol
8 ohms or more
SPEAKER (SATELLITE),
accepts speakers of 8 to
16 ohms.
SPEAKER (BASS):
accepts speaker ol 6 to
16 ohms.
Compact Disc Player Section
(CPP-H3600)_______________________________
System
Laser
Laser output
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Output level
Load impedance
Outputs
Compact disc digital audio
system
Semiconductor laser
(/. = 780 nm)
Emission duration:
continuous
Max 44 6 ^W*
* This output IS the value
measured at a distance ol
about
200 mm from the
objective lens surface on
the Optical Pick-up Block.
More than 90 dB
More than 90 dB
Less than 0.05% (at 1 kHz)
More than 90 dB
2 V (at 50 kilohms)
More than 10 kilohms
DK3ITAL OUT OPTICAL
(optical output connector):
wave length 660 nm.
output level -18 dBm
Section iecteur CP (CDP-H3600)_____________
Système Système audio-numèrique de
disque compact
Laser Semiconducteur
(X = 780 nm)
Durée d émission: continue
Sortie laser Max 44.6 pW*
* Cette sortie correspond a
une valeur mesurée é une
distance d'environ
200 mm
de la surface de l'obiectif
sur le bloc du capteur
optique
Rapport signal/bruit Supérieur é 90 dB
Plage dynamique Supérieure à 90 dB
Distorsion harmonique
Inférieure й 0.05% (й 1 kHz)
Séparation des canaux
Supérieure é 90 dB
Niveau de sortie 2 V (é 50 kilohms)
Impédance de charge
Supérieure é 10 kilohms
Sorties DIGITAL DUT OPTICAL
(connecteur de sortie
optique):
longueur d'onde de 660
nm. niveau de sortie:
-18 dBm
Section piatine-cassette (TC-H3600)
Système d'enregistrement
4 pistes. 2 canaux stéréo
Réponse en fréquence (Circuit Dolby coupé)
40 — 13 000 Hz (+3 dB).
avec cassette TYPE I
(Sony HF-S)
40 — 14 000 Hz (+3 dB).
avec cassette TYPE II
40 — 15 000 Hz (±3 dB) avec
cassette TYPE IV
Pleurage et scintillement
0.1*/» efficace +0.3% (DIN)
Enfrées PHONO (prises phono)
sensibilité 2.5 mV.
impédance 47 kilohms
DAT (prises phono):
sensibilité 450 mV.
impédance 47 kilohms
VIDEO (prises phono):
sensibilité 300 mV.
impédance 47 kilohms
Cassette Peck Section (TC-H3600)
Recording system 4-track 2-channel stereo
Frequency response (DOLBY NR OFF)
40 — 13.000 Hz (+3 dB).
using TYPE I cassette
(Sony HF-S)
40 — 14.000 Hz (±3 dB).
using TYPE II cassette
40 — 15.000 Hz (±3 dB) using
TYPE IV cassette
Wow and flutter 0.1 % WRMS ±0.3% (DIN)
Inputs
PHONO (phono jacks):
sensitivity 2.5 mV.
impedance 47 kilohms
OAT (phono jacks):
sensitivity 450 mV.
impedance 47 kilohms
VIDEO (phono jacks):
sensitivity 300 mV.
impedance 47 kilohms
64