Sony KP-FX432M31 - Manuel (Page 59)

59 Additional Information
• Press A/B until “Auto” appears on
the screen.
• Press or .
• Check the antenna cable and
connection on the projection TV, VCR
and on the wall.
• Adjust the antenna direction. Contact
a Sony dealer for advice.
• Press A/B until a better sound is
heard.
—
• Check the antenna cable and connection
on the projection TV, VCR, and at the wall.
• Adjust the antenna direction. Contact a
Sony dealer for advice.
• Try using a booster.
• Use the fine tuning (”Fine”) function.
• Use the fine tuning (”Fine”) function.
Possible cause Symptom Solutions Page
28
22
7
–
27
29
7
–
–
50
50
Projection TV cannot
receive stereo
broadcast signal.
Stereo broadcast
sound switches on
and off or is
distorted.
or
The sound switches
between stereo and
monaural
frequently.
“100” appears at
the top of the
screen after
approximately 10
seconds and there is
no Teletext display.
Teletext display is
incomplete
(snowy picture or
double images).
Lines moving across
the TV screen.
• The stereo reception
setting is inappropriate.
• The sound of the sub
picture is selected
when TWIN pictures
are displayed.
• The connection is
loose or the cable is
damaged.
• The antenna direction
needs adjustment.
• The broadcast signal
has a transmission
problem.
• The channel carries
no Teletext broadcast.
• Connection is loose
or the cable is
damaged.
• The antenna direction
is inappropriate.
• Signal transmission is
too low.
• There is interference
from external
sources, e.g., heavy
machineries, nearby
broadcast station.
continued