Accessories, Warning – Lincoln Electric VANTAGE SVM178-B Manuel d'utilisation
Page 100
ACCESSORIES
C3.2
C3.2
VANTAGE® 500
K802N POWER PLUG KIT - Provides four 120V plugs rated at 20
amps each and one dual voltage, full KVA plug rated at 120/240V,
50 amps. 120V plug may not be compatible with NEMA common
household receptacles.
K802R POWER PLUG KIT - Provides four 120V plugs rated 15
amps each and one dual voltage, full KVA plug rated at 120/240V,
50 amps, 120V plug is compatible with NEMA common household
receptacles.
K857 25 ft. (7.5 m) or K857-1 100 ft. (30.4 m) REMOTE CON-
TROL - Portable control provides same dial range as the output
control on the welder from a location up to the specified length
from the welder. Has convenient plug for easy connection to the
welder. The VANTAGE 500 CUMMINS is equipped with a 6-pin
connector for connecting the remote control.
K704 ACCESSORY SET - Includes 35 feet (10 m) of
electrode cable and 30 feet (9 m) of work cable, head-
shield, Filter plate, work clamp and electrode holder.
Cable is rated at 500 amps, 60% duty cycle.
K2641-2 FOUR WHEELED STEERABLE YARD
TRAILER
For in plant and yard towing. Comes standard with a Duo-
Hitch™, a 2” Ball and Lunette Eye combination hitch.
K2636-1 TRAILER - Two-wheeled trailer with optional fender
and light package. For highway use, consult applicable federal,
state, and local laws regarding possible additional require-
ments. Comes standard with a Duo-Hitch™, a 2” Ball and Lunette
Eye combination hitch, a fender & a light package. Order:
K2636-1 Trailer
K958-1 Ball Hitch
K958-2 Lunette Eye Hitch
K2639-1 Fender & Light Kit
K2640-1 Cable Rack
K887-1 ETHER START KIT - Provides maximum cold weather
starting assistance for frequent starting below 10°(-12°C).
Required Ether tank is not provided with kit.
K899-1 SPARK ARRESTOR KIT - Easily mounts to standard
muffler.
K1816-1 Full KVA Adapter Kit - Plugs into the
120/240V NEMA 14-50R receptacle on the case front
(which accepts 4-prong plugs) and converts it to a
NEMA 6-50R receptacle (which accepts 3-prong plugs)
for connection to Lincoln Equipment with a NEMA 6-
50P plug,
T12153-9 Full-KVA Power Plug-One dual voltage
plug rated at 120/240V, 50 amps, single phase.
K2356-1 Control Panel Cover Kit-Clear plexiglass
cover to protect control panel from dirt and debris, and
to visually monitor machine operation. Lockable to deter
vandalism.
K2340-1 Lockable Fuel Cap / Flash Arrester Kit-For
use in locations where flash arrester safety is required.
Lockable fuel cap prevents tampering with fuel. Green
cap color provides a visual reminder to use diesel when
refueling.
PLASMA CUTTING
K1581-1 Pro-cut 80 - Cuts mild steel using the 3-phase
AC generator power from the engine driven welder.
NOTE: Other Linclon plasma cutters, both single phase
and 3 phase can be used as long as the rating
of the receptacle is not exceeded
Pipe Thawing with an arc welder can cause fire,
explosion, damage to electric wiring or to the arc
welder if done improperly. The use of an arc welder
for pipe thawing is not approved by the CSA, nor is
it recommended or supported by Lincoln Electric.
------------------------------------------------------------------------
OPTIONAL FIELD INSTALLED ACCESSORIES
WARNING