Philips SCZ142AT - Manuel (Page 44)

44 Hi-Fi Stereo Sound System (SCZI62 only)
Multi-Channel Television Sound System broadcasts are automatical­
ly recorded in Hi-Fi stereo sound. To play in Hi-Fi stereo tapes
recorded in Hi-Fi stereo, however, you’ll need to follow the steps
below. Make sure:
• The VCR is on and is in VCR position.The VCR/TV light will
appear. If it does not, press the VCR/TV button once.
I
Press the MENU button repeatedly until the VCR SET UP
menu appears.
VCR SET UP
SATELLITE LINK
AUTO REPEAT
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
SAP ,,
[ON]
I
Press the PLAY button or the STOP button repeatedly to
select AUDIO OUT. Then, press the F.FWD button.
VCR SET UP
SATELLITE LINK
AUTO REPEAT
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
SAP
[ON]
3
Press the PLAY button or the STOP button repeatedly to
select HIFI. [ON] will appear to the right of HIFI on-screen.
^ HIFI
MONO
[ON]
4
Press the MENU button repeatedly until the VCR SET UP
menu appears again.
5
Press the PLAY button or the STOP button repeatedly to
select TV STEREO. Then, press the F.FWD button.
[ON] will appear beside TV STEREO.
6
Press the COUNTER RESET/EXIT button to exit.
Helpfoil Mints
All programs are automatically
recorded in both Hi-Fi stereo sound
and in monaural sound.
The audio level of a tape recarded
in Hi-Fi stereo will differ from the
audio level of a tape not recorded in
Hi-Fi stereo.
Normally, HIFI should be selected
from the AUDIO OUT menu for
playback with Hi-Fi sound. But, you
can change the selection to MONO
if you want monaural audio play­
back. To do this, follow steps I - 2
above. At step 3, press the PLAY but­
ton or the STOP button repeatedly
to select MONO. Press the
COUNTER RESET/EXIT button to
exit HIFI will disappear from the
status display.
If you play non-Hi-Fi tapes while the
VCR is set to HIFI, HIFI will not
appear on the status display and the
tape will play in monaural sound.
Please see additional notes
on page 47.