Philips SCZ142AT - Manuel (Page 26)

26 Timer Recording
Follow the steps below to program your VCR to record TV pro­
grams while you’re away from home.You can program up to seven
timer recordings. For each one, the VCR will turn itself on, record,
and turn itself off automatically. Before you begin make sure:
• Channels are set up.
• The clock is set.
• There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
• The VCR is on and in VCR position.The VCR/TV light will appear.
If it does not, press the VCR/TV button once. (When you finish
programming the timer recording, you must turn off the VCR.)
I
Press the MENU button until the TIMER PROGRAM­
MING menu appears. Program numbers that do not have a
timer recording stored will flash.
TiME^,ifRq(Siw^i1M(NG
PROG.i I 2 3 45 6 7 .c
DATE 111111111" II! I
STARTTIME
END
TIME
CHANNEL
REC SPEED
Press the PLAY button or the STOP button repeatedly to
select a program number.Then, press the F.FWD button.
(If you select a program number that already has a timer recording
stored, information about that program will appear. Press the PLAY
button or the STOP button to select another program number.)
PROGRAM NUMBER ^
DATE
_ _ / _ L
STARTTIME --------
END TIME --------
CHANNEL
REC SPEED
Press the PLAY button or the STOP button repeatedly to
select a ONCE, DAILY, or WEEKLY recording. When the
arrow is beside your choice, press the F.FWD button.
• ONCE - The VCR will record a TV program on any day you
choose, up to 12 months away.
• DAILY - The VCR will record a TV program at the same time on
the same channel every day, Monday through Sunday.
• WEEKLY - The VCR will record a TV program at the same time
on the same channel every week, for example, every Monday.
PROGRAM NUMBER I
^ ONCE
DAILY
WEEKLY