Philips SCZ142AT Manuel d'utilisation
Page 10
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
/ 0 Hookups With a Stereo TV
Connect the antenna or cable to the ANT(enna) IN Jack on the back of the
VCR.
2
Connect a video cable (not supplied) to the yellow VIDEO OUT Jack on the
back of the VCR.Then, connect the other end of the video cable to the
VIDEO IN Jack on your TV.
3
SCZI62
Connect an audio cable (not supplied) to the red and white AUDIO OUT
Jacks on the back of the VCR.Then, connect the other end of the audio cable
to the AUDIO IN Jacks on your TV.
3
SCZI42
Connect an audio cabie (not supplied) to the white AUDIO OUT Jack on
the back of the VCR.Then, connect the other end of the audio cable to the
AUDIO IN Jack on your TV.
If your TV has Right and Left AUDIO IN Jacks, you must use a“Y” splitter audio cable
as illustrated to deliver audio to the TV’s right and left channels.This hookup will not
give you stereo sound.To get stereo sound, use the connections on pages six-seven and
select the channel to be viewed at the TV (with the VCR turned off).
4
Turn on your TV, making sure it is in Line Input mode. Please refer to your TV
owner’s manual for details.