Philips SCZ142AT Manuel d'utilisation
Page 23
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Read and follow the steps below to play a tape.
I
Turn on the TV and set it to channel 3 or 4, whichever chan
nel the CH3/CH4 switch on the back of the VCR is set to.
2
Insert a tape in the VCR. The POWER, VCR/TV, and CST.IN
lights will appear. If the tape’s record tab has been removed, play
back will begin automatically.
3
If playback does not start automatically, press the PLAY
button.
4
Press the STOP button to stop playback.
5
Press the REWIND button to rewind the tape.
6
When the tape has finished rewinding, press the EJECT
button to remove the tape.
Playing 23
1
2
Turn on the TV.
Insert a tape.
6
3
Helpful Hints
If the tape you want to play is
already in the VCR, make sure the
VCR power is on and the VCR is in
VCR position. (Press the VCR/TV but
ton so that the VCR/TV light
appears.) Then, press the PLAY but
ton.
Other playback options and fea
tures are on pages 3 4 - 4 1 .