Philips SCZ142AT - Manuel (Page 31)

Auto Satellite Link Using a Satellite Tuner 31
If you connect your VCR to a satellite tuner that has the
Electronic Program Guide, the VCR will turn itself on, record, then
turn itself off. First, read the owner’s manual of your satellite
tuner; then, follow these steps to set up your VCR. Before you
begin:
• Use audio and video cables to connect the AUDIO/VIDEO IN
jacks on the back of the VCR to the AUDIO/VIDEO OUT jacks
on the satellite tuner.
• Press the SPEED button to select the desired tape speed (SP, LP,
or SLP).
\
Set the program to be recorded on the satellite tuner. See
your satellite tuner owner’s manual for details.
2
Press the MENU button repeatedly until the VCR SET UP
menu appears.
VCR SET UP
SATELLITE LINK
AUTO REPEAT
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
SAP
[ON]
I Set the program to
be recorded on the
satellite tuner.
4
Press the PLAY button or the STOP button repeatedly to
select SATELLITE LINK.
4
Press the F.FWD button so that [ON] appears beside
SATELLITE LINK. After one second, the VCR will turn itself off
and the TIMER light will appear on the VCR display panel.
VCR SET UP
SATELLITE LINK [ON]
AUTO REPEAT
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO
SAP
[ON]
Help ful Hints
To exit a stand-by mode of the Auto
Satellite Link, press the POWER but­
ton to turn on theVCR.TheVCR sets
SATELLITE LINK to OFF automati­
cally.
To stop an Auto Satellite Link
recording that is in progress, press
the STOP/EJECT button on the VCR.
If the preset time for an Auto
Satellite Unk comes up during a
timer recording, the timer recording
has priority.
If a program has copy guard protec­
tion, it may not record clearly.
If noise appears on the TV screen
when you view a program, canned
the satellite tuner diredly to the TV.
When you use this feature, the first
few secands of a program may not
be recorded.
If your satellite tuner has the syn­
chronized timer feature by the
broadcasting time of a program,
refer to the tuner’s owner’s manual.