Philips SCZ142AT - Manuel (Page 25)

One-Touch Recording 25
The One-Touch Recording function allows you to program an
immediate timed recording 30 minutes to eight hours long. Before
you begin, make sure:
® Channels are set up.
• The desired recording speed (SP, LP, SLP) has been selected with
the SPEED button.
©There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
® The VCR is in VCR position. (The VCR/TV light will appear. If it
does not, press the VCR/TV button once.)
Starting an OTR
I
Use the CHANNEL buttons or the Number but­
tons to sefect the channel you want to record.
2
Press the REC(ord)/OTR button on the VCR repeatedly
until the desired recording length (30 minutes to eight
hours) appears in the upper left corner of the screen.
Recording will begin immediately.
OTR (0:30)
2 Press the REC(ord)/OTR
button on the VCR repeat­
edly.
POWER VCRm/ ¿EJECT
О о о
,1 .23
О О о
О о о Q
: 7.: ' . ' 8 - ' ' CiWMEL
о о о о"
SPEED
ООО
QUICK- P'SEARCH —i
SLOW ЛМЕ INDEX
О О О О
MENU DISPLAY EXIT rCOUMTER
О о о о
RESET-^MEM(anY
-о
RECORD
О
D О-
D О
I
Stopping an OTR
To stop an OTR before recording is finished, press the STOP but­
ton on the remote control. To cancel the OTR but continue
recording, press the REC(ord)/OTR button on the VCR repeat­
edly until REC appears in the upper left corner of the screen.
Helpful Hints
To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button on the VCR
repeatedly until the desired length
appears on-screen.
You can not pause recording during
an OTR.
If the preset time for a timer
recording comes up during an OTR,
the OTR has priority. The timer
recording will not occur.
To show the time remaining for an
OTR, press the DISPLAY button
repeatedly until OTR and the time
remaining appear in the upper left
corner of the screen.
If the end of the tape is reached
during an OTR, the VCR will stop
recording, eject the tape, and turn
itself off