Philips SCZ142AT - Manuel (Page 38)

38 Index Search
When you make a recording, the VCR places an index mark at the
beginning of the recording. Essentially, an index mark is a type of
“bookmark” for your tape.This feature is useful if you have several
different programs recorded on a single tape.
You may skip over programs by following the steps below. Before
you begin, make sure:
• The VCR is on and is in VCR position. (TheVCR/TV light will
appear. If it does not, press the VCR/TV button once.)
• There is a tape in the VCR.
I
Press the MENU button repeatedly until the SEARCH
SELECT menu appears.
/
SEARCH SELECT \
QUICK-FIND
INDEX
search
TIME SEARCH
2
Press the PLAY button or the STOP button repeatedly to
select INDEX SEARCH.Then, press the F.FWD button.
3
Within 30 seconds, press the PLAY button or the STOP
button repeatedly until the number of programs that you
want to skip appears beneath INDEX SEARCH on-screen.
(Example: 03 for three programs)
4
While the number of programs is flashing, press the
REWIND button or the F.FWD button.
The VCR begins rewinding or fast forwarding to the beginning of
the desired program. When the program is reached, the VCR will
start playback automatically.
Helpful Hints
You may also activate the Index
Search by pressing the INDEX
SEARCH button. Then, continue from
step 3.
Every time an index mark is
passed, the number of programs
beneath INDEX SEARCH on-screen
decreases by one.
Up to 20 index marks may be
stored and searched.
This function is not available during
recording.
Press the STOP button to stop the
search.
To exit Index Search mode, press
the COUNTER RESET/EXIT button.
The time gap between index marks
should be greater than I minute for
SP recording, 2 minutes for LP
recording, and 3 minutes for SLP
recording.