Philips SCZ142AT - Manuel (Page 40)

40 Quick Find
The Quick Find feature locates the beginning of each recording on
a tape, then plays the first portion of the recording at high speed
for 30 seconds. After it plays the portion, the VCR fast forwards
the tape to the next recording.This process is repeated until the
end of the tape is reached, or until you stop the Quick Find.
To start a Quick Find, press the QUICK-FIND button on the
remote control, or follow the steps below.
I
Press the MENU button repeatedly until the SEARCH
SELECT menu appears.
SEARCH SELECT \
QUICK-FIND
INDEX SEARCH
TIME SEARCH
2
Press the PLAY button or the STOP button repeatedly to
select QUICK-FIND, then press the F.FWD button. The
VCR will fast forward the tape to the beginning of the next
recording.The VCR will play the tape at high speed for 30 seconds,
then go to the next recording.
To skip immediately to the beginning of the next recording on the
tape, press the QUICK-FIND button on the remote control.
3
To resume normal tape playback, press the PLAY button.
Helpful Hints
There must be a tape in the VCR.
This function will not operate during
a recording.
To cancel a Quick Find that is in
progress, press the STOP button.
When the end of a tape is reached
during a Quick Find, the VCR will
rewind the tape to the beginning,
eject the tape, and turn itself off. If
a real-time counter memory is set,
the VCR will rewind the tape to the
point at which the real-time counter
was set to zero, then stop.