Pioneer NS-DV1000 - Manuel (Page 77)

Additional information 14
77
En
4 Use the / (cursor up/down) buttons
to select ‘Off’
• You can also switch the demo back on by
choosing ‘On’.
5 Press ENTER to exit.
Changing the frequency step
(U.S. model only)
• Default setting: AM 10kHz/FM 100kHz
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region. Here’s how to
switch the setting:
1 Switch the system into standby.
2 Press SYS MENU.
3 Use the / (cursor left/right) buttons
to select ‘Tuner Step’.
The current setting is shown in the display.
4 Use the / (cursor up/down) buttons
to select AM 9kHz/FM 50kHz or AM 10kHz/
FM 100kHz.
5 Press ENTER to exit.
Setting the TV System
(European model only)
The default setting of this player is AUTO, and
unless you notice that the picture is distorted
when playing some discs, you should leave it
set to
AUTO. If you experience picture distor-
tion with some discs, set the TV system to
match your country or region’s system. Doing
this, however, may restrict the kinds of disc you
can watch. The table below shows what kinds of
disc are compatible with each setting (
AUTO,
PAL and NTSC).
1 Switch the system into standby.
2 Press SYS MENU.
3 Use the / (cursor left/right) buttons
to select ‘TV system’.
The current setting is shown in the display.
4 Use the / (cursor up/down) buttons
to select AUTO, NTSC or PAL.
5 Press ENTER to exit.
Disc Player setting
Type
DVD/
Super VCD
Video CD
Super VCD
CD / no disc
Format
NTSC
PAL
NTSC
PAL
–
NTSC
NTSC
PAL
NTSC
NTSC
NTSC
PAL
MOD.PAL
PAL
MOD.PAL
PAL
PAL
AUTO
NTSC
PAL
NTSC
PAL
NTSC or PAL
Watching NTSC on a PAL TV
Most models of the newly developed countdown
PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC)
and automatically switch vertical amplitude,
resulting in a display without vertical shrinkage.
If your PAL TV does not have a V-Hold control,
you may not be able to watch NTSC discs
because of picture roll. If the TV has a V-Hold
control, adjust it until the picture stops rolling.
On some TVs, the picture may shrink vertically,
leaving black bands at the top and bottom of
the screen. This is not a malfunction; it is
caused by the NTSC to PAL conversion.