Pioneer NS-DV1000 - Manuel (Page 60)

The Initial Settings menu 12
60
En
• This player is compatible with the
following Pioneer displays and monitors:
PDP-5030HD, PRO-1000HD, PRO-
800HD, PDP-4330HD, PRO-720HD,
PRO-620HD, PRO-520HD, SD-643HDS,
SD-533HDS.
AV Connector Out
(European model only)
• Default setting: Video
You only need to make this setting if you
connected this player to your TV using the AV
SCART-type connector.
• If you make a setting here that is
incompatible with your TV, the TV may
not display any picture at all. If this
happens either switch everything off
and reconnect to the TV using either the
supplied video cable, or an S-Video
cable (see
page 71 for more on this).
• SCART cables come in various configu-
rations. Make sure you use the correct
one for your TV/monitor. See
page 81 for
the SCART pin assignment diagram
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
TV Screen
AV Connector Out
S-Video Out
Still Picture
Video
S-Video
RGB
Initial Settings
• Video – Compatible with all TVs, but
lowest quality of the three AV settings.
• S-Video – Almost the same quality as
RGB, but can give better results if you
are using a long SCART cable.
• RGB – If your TV is compatible, this
setting gives the best picture quality.
Component Out
(US model only)
• Default setting: Interlace
You only need to make this setting if you
connected this player to your TV using the
component video outputs.
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
TV Screen
Component Out
S-Video Out
Still Picture
Progressive
Interlace
Initial Settings
If you have a progressive-scan compatible TV,
set this to
Progressive for flicker-free video
output. If your TV is not compatible with
progressive-scan video, set to
Interlace.
Check the operating instructions that came
with your TV if you’re unsure about its
compatibility.
• If you make a setting here that is
incompatible with your TV, the TV may
not display any picture at all. If this
happens either switch everything off
and reconnect to the TV using either the
supplied video cable, or an S-Video
cable (see
page 71 for more on this).
Compatibility of this unit with
progressive-scan TVs
This player is compatible with progressive
video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR
TV SET COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.