Pioneer NS-DV1000 - Manuel (Page 45)

Playing other components 06
45
En
Selecting an external compo-
nent as your source
This system has three sets of audio/video
inputs that you can use to connect up to
three external components. There’s also a
pair of audio inputs that you can use to route
your TV’s audio through this system.
See also Other Connections on pages 71 to
75 for how to connect external components
to this system.
1 Press V1/V2/V3 VIDEO repeatedly to
select the external input you want.
• To select the TV inputs, press TV.
2 Start playing the external component.
Changing the audio input from
analog to digital
The Video 2 and Video 3 inputs have both
analog and digital audio inputs. You can
switch between these as required.
1 Press V1/V2/V3 VIDEO to select
‘Video 2’ or ‘Video 3’, as required.
The current input is shown in the display.
2 Press SYS MENU.
3 Use the / (cursor left/right)
buttons to select ‘Video 2 Audio’ or
‘Video 3 Audio’.
4 Use the / (cursor up/down)
buttons to select the input type.
For the Video 2 input you can choose
between
Optical and Analog. For Video 3,
choose between Coaxial and Analog.
5 Press ENTER.
Reducing the line signal level
• Default setting: ATT OFF
Some analog sources produce a high signal
level which can result in unpleasant distor-
tion from the speakers. In such cases, you
can reduce the input level to restore proper
sound. Each analog input has its own
attenuator setting.
1 Switch the system into standby.
2 Press SYS MENU.
3 Use the / (cursor left/right)
buttons to select the input: ‘Video 1
Audio’, ‘Video 2 Audio’, ‘Video 3 Audio’
or ‘TV Audio’.
4 Use the / (cursor up/down)
buttons to select a setting.
There are three settings available:
• 6dB ATT – reduces the input level by
6dB
• 10dB ATT – reduces the input level by
10dB
• ATT OFF – no change in the input level
5 Press ENTER to exit.