Pioneer NS-DV1000 - Manuel (Page 41)

Listening to the radio 05
41
En
Choosing stations
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to
manually tune in every time you want to
listen.
TUNE+
ENTER
TUNE–
SYS MENU
FM/AM
TUNER
1 Press TUNER (remote or front panel)
to switch to the tuner and select the AM
or FM band.
Press repeatedly to switch between AM and
FM.
2 Tune to a frequency.
There are three tuning modes—manual,
auto, and high-speed:
Manual tuning: Press TUNE + or –
repeatedly to change the displayed
frequency.
Auto tuning: Press and hold TUNE + or –
until the frequency display starts to
move, then release. The tuner will stop
on the next station it finds. Repeat to
search for other stations.
High-speed tuning: Press and hold
TUNE + or – until the frequency display
starts to move rapidly. Keep the button
held down until you reach the frequency
you want. If necessary, fine tune the
frequency using the manual tuning
method.
Improving poor FM reception
If you’re listening to an FM station in stereo
but the reception is weak, you can improve
the sound quality by switching to mono.
1 Press SYS MENU.
2 Use the / (cursor left/right)
buttons to choose ‘FM Mode’.
3 Use the / (cursor up/down)
buttons to select ‘Mono’ then press
ENTER.
The
MONO indicator lights in the display
when the tuner is in mono reception mode.
• Select ‘Auto’ to switch back to auto-
stereo mode (the stereo indicator lights
when receiving a stereo broadcast).