Pioneer NS-DV1000 - Manuel (Page 69)

The Initial Settings menu
69
En
12
2 Press (cursor right) to change the
speaker distance for the highlighted
speaker.
3 Use the / (cursor up/down)
buttons to change the distance.
• Distances can be set in the range of 1 ft.
/ 0.3 m to 30 ft. / 9 m in increments of
1 ft. / 0.3 m.
4 Press (cursor left) to go back to the
speaker list if you want to modify
another speaker, or press ENTER to exit
the Speaker Distance screen.
• Speaker Distance settings do not affect
SACD playback.
Channel Level
This setting does not affect digital audio
output.
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
Speaker Distance
Channel Level
Initial Settings
For good surround sound, you should set the
relative channel levels from your usual
listening position so that all channels sound
balanced in terms of volume. You can do this
while playing a surround sound disc (see
page 48 for how to do this), or by using the
built in test tone generator. Before starting,
unplug any headphones and make sure
muting isn’t on.
Press SURROUND to select a surround
mode other than Auto or Stereo. You can
set seperate levels for each surround mode.
You can set the individual channel levels
between –10dB and +10dB in 1 dB incre-
ments using the test tone output as a guide
to set the correct levels. Adjust the levels
until the output level from all channels
sounds the same from your usual listening
position.
Automatic: Select Auto to start the test
tone output.
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings
As the test tone plays through each speaker
in turn, it is highlighted on-screen. Use the
/ (cursor up/down) buttons to adjust the
channel output level of the current speaker.
Press (cursor left) to exit the test tone
sequence, or
ENTER to save the settings and
exit the channel level setting screen.
Note that some of the speakers may be
grayed out, depending on the current
surround mode.
Manual: Move the cursor up/down to select
a speaker.
Digital Audio Mode
Video Output
Language
Display
Options
Speakers
L
C
R
RS
LS
SW
Auto
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
0.0dB
Initial Settings