Rockwell Automation 1756-SPESMNRMXT GuardLogix Controllers User Manual - Manuel (Page 33)

Rockwell Automation Publication 1756-UM020I-EN-P - August 2012 33
Install the Controller Chapter 2
Remove a CF Card
Follow these steps to remove the memory card.
1. If the OK status indicator is flashing green, wait until it turns solid green.
2. Open the door of the controller.
3. Push and hold the latch to the left.
4. Push the eject button and remove the card.
5. Release the latch.
RS232
BATTERY PORT
1-DCD
2-RXD
4-DTR
3-TXD
5-GND
DSR-6
CTS-8
RTS-7
N/C-9
1
2
BATTERY DATE
UP
COMPACT FLASH
2
To
Insert 1
To Eject
1 + 2 2
1
1