2 setting the time, Changing the time, 3 preheating – Electrolux EKC6670AOW Manuel d'utilisation

Page 9: Hob - daily use, 1 heat setting, 2 residual heat indicator

Advertising
background image

Refer to "Care and cleaning"

chapter.

Clean the appliance before first use.

Put the accessories and the removable

shelf supports back to their initial position.

4.2 Setting the time

After the first connection to the mains, all

symbols in the display are on for some

seconds. For the subsequent few seconds

the display shows the software version.
After the software version goes off, the
display shows

and "

12:00". "12"

flashes.

1. Press or to set the current hour.
2. Press to confirm. This is necessary

only when you set the time for the first

time. Later the new time will be saved

automatically after 5 seconds.

The display shows

and the set

hour. "

00" flashes.

3. Press or to set the current

minutes.

4. Press to confirm. This is necessary

only when you set the time for the first

time. Later the new time will be saved

automatically after 5 seconds.

The display shows the new time.

Changing the time

You can change the time of day only if the

oven is off.

Press .
The set time and symbol flash in the

display.

To set a new time, refer to "Setting the

time".

4.3 Preheating

Preheat the empty appliance to burn off

the remaining grease.

1. Set the function and the maximum

temperature.

2. Let the appliance operate for 1 hour.
3. Set the function and the maximum

temperature.

4. Let the appliance operate for 15

minutes.

5. Set the function and the maximum

temperature.

6. Let the appliance operate for 15

minutes.

Accessories can become hotter than

usual. The appliance can emit an odour

and smoke. This is normal. Make sure that

the airflow in the room is sufficient.

5. HOB - DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Heat setting

Symbols Function

Off position

Keep warm

1 - 9

Heat settings

Use the residual heat to

decrease energy

consumption. Deactivate the

cooking zone approximately

5 - 10 minutes before the

cooking process is

completed.

Turn the knob to a necessary heat setting.

To complete the cooking process, turn the

knob to the off position.

5.2 Residual heat indicator

WARNING!

There is a risk of burns from

residual heat.

ENGLISH

9

Advertising