Electrolux EKC6670AOW - Manuel (Page 32)

Problem Possible cause Remedy
The oven display shows
"F102".
• You did not fully close
the door.
• The door lock is defec-
tive.
• Fully close the door.
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows
"F102" again, contact
the Customer Care De-
partment.
The oven is activated and
does not heat up. The fan
does not operate. The oven
display shows "Demo".
The demo mode is activa-
ted.
1. Deactivate the oven.
2. Press and hold the but-
ton .
3. When an acoustic sig-
nal sounds, turn the
knob for the oven func-
tions clockwise to the
first function. "Demo"
flashes in the display.
4. Turn the knob for the
oven functions to the off
position.
5. Release the button .
6. Turn the knob for the
temperature clockwise
and hold it for three
seconds. The acoustic
signal sounds three
times. The demo mode
is deactivated.
The display shows an error
code that is not in this ta-
ble.
There is an electrical fault. Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again.
If the display shows the er-
ror code again, contact the
Customer Care Depart-
ment.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is on
the front frame of the appliance cavity. Do
not remove the rating plate from the
appliance cavity.
www.electrolux.com 32