Oven - care and cleaning, 1 notes on cleaning, 2 stainless steel or aluminium appliances – Electrolux EKC6670AOW Manuel d'utilisation

Page 28: 3 pyrolysis

Advertising
background image

11. OVEN - CARE AND CLEANING

WARNING!

Refer to Safety chapters.

11.1 Notes on cleaning

• Clean the front of the appliance with a

soft cloth with warm water and a

cleaning agent.

• To clean metal surfaces, use a usual

cleaning agent.

• Clean the appliance interior after each

use. Fat accumulation or other food

remains may result in a fire. The risk is

higher for the grill pan.

• Clean stubborn dirt with a special oven

cleaner.

• Clean all accessories after each use

and let them dry. Use a soft cloth with

warm water and a cleaning agent.

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a

dishwasher. It can cause damage to

the nonstick coating.

11.2 Stainless steel or aluminium

appliances

Clean the oven door with a

wet sponge only. Dry it with a

soft cloth. Do not use steel

wool, acids or abrasive

materials as they can

damage the oven surface.

Clean the oven control panel

with the same precautions.

11.3 Pyrolysis

CAUTION!

Remove all accessories and

removable shelf supports.

Do not start the Pyrolysis if

you did not fully close the

oven door. In some models,

the display shows "C3" when

this error occurs.

WARNING!

The appliance becomes very

hot. There is a risk of burns.

CAUTION!

Do not use the hob at the

same time as the Pyrolysis

function. It can cause

damage to the appliance.

1. Remove the worst dirt manually.

2. Clean the inner side of the door with

hot water, so that the residues do not

burn from the hot air.

3. Set the Pyrolysis function. Refer to

"Oven functions".

4. When

flashes, press or to

set the necessary procedure:

Option

Description

P1

If the oven is

not very dirty.

Time of the

procedure: 1

h 30 min.

P2

If you cannot

easily remove

the dirt. Time

of the proce-

dure: 2 h 30

min.

You can use the End function to delay

the start of the cleaning procedure.

During the Pyrolysis the oven lamp is

off.

5. To change the default length of the

procedure (

P1 or P2), press to set

, and then press or to set

the length of the cleaning procedure.

6. When the oven is at its set

temperature, the door locks. The
display shows the symbol and the

www.electrolux.com

28

Advertising