GE Industrial Solutions AKD-20 Low Voltage Switchgear - Manuel (Page 44)

AKD-20 Low Voltage Switchgear
Chapter 4. Equipment Installation
44 ©2012 General Electric All Rights Reserved
Breaker Hoist
Indoor Equipment
Figure 4-25 shows the breaker hoist assembled on an indoor
switchgear equipment. When supplied with indoor equipment, the
hoist is shipped in a separate carton completely assembled, Fig. 4-
26.
Before attempting to install the hoist assembly on the switchgear
equipment, it is necessary to remove the runner guide from the
hoist carriage as shown in Fig. 4-27. Do not dispose of this guide
since it must be reinstalled after mounting the hoist on the
equipment.
NOTE: Maximum recommended lifting capacity is 700 lbs.
NOTE: La capacité maximale recommandée de soulèvement est
de 700 livres.
Fig. 4-25. Breaker hoist assembly on indoor switchgear
Fig. 4-26. Carton containing breaker lifting device
Fig. 4-27. Removal of hoist runner guide