JVC DLA-M5000LE - Manuel (Page 45)

43
Operating the Main Menu
ENGLI
S
H
DEUTSH
FRAN
Ç
AIS
ITALIANO
ESPA
Ñ
OL
DLA-M5000CLE (Re)/ LCT0979-002A / ENGLISH
Changing (Setting) the Source
■ Remote control unit
■ Main menu
Notes
• The selected item is shown in magenta color. Items shown
in gray color cannot be operated or set in the current mode.
• Items that can be set are different when video signals are
input and when computer signals are input.
• For dedicated source signals (corresponding frequency,
etc.) for computer signals, see page 18.
Normally, use the source setting in AUTO. If use in AUTO is
unstable such as color not appearing, the screen being
disturbed or the screen being intermitted, set to the
dedicated source (forced mode) in accordance with the input
signal.
Also, USER mode, which is a user-dedicated source, is
available.
• When shipped from the factory, the source settings are as
follows:
Notes
• Depending on the signal from a device connected,
adjustment may be needed after a dedicated source is set.
If that is the case, adjust the appropriate items.
• When the input mode (SOURCE) is VIDEO or Y/C, and if
AUTO is set, the automatic detecting function may work,
possibly causing the screen to be intermitted or disturbed.
In that case, set to a dedicated source (forced mode).
• When special effect playback (fast-forward/twice-speed/
triple-speed) is performed on a video deck, etc., the picture
may be disturbed or intermitted, depending on the device.
• When inputting 480p or 720p-DTV-format signal in RGB 2
input mode, use the dedicated source cannot be detected.
1 Press the MENU/ENTER button.
• The main menu appears on the screen.
2
Press MENU/ENTER toward the 5 or ∞
mark to select “SOURCE”.
• The selected item (displayed in text) is shown in
magenta color.
3 Press the MENU/ENTER button.
• The submenu items, SOURCE menu, appears on the
screen.
4 Press MENU/ENTER toward the 2, 3,
5 or ∞ mark to select a source from the
“SOURCE” items.
• The selected item (text display) is shown in magenta
color.
PAGE BACK button
MENU/ENTER button
MEN
U/E
N T E R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
U T +
D W –
RGB/COMPUTER
LENS
LOCK
UNLOCK
PAGE BACK
N T S C ( 4 8 0 i )
E N G L I S H
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Y P B P R
C H : 1
H D T V ( 1 0 8 0 i )
Submenu item [SOURCE]
Input mode
Factory
setting
Input mode
Factory
setting
VIDEO PAL/SECAM RGB 1 AUTO
Y/C PAL/SECAM RGB 2 AUTO
YPBPR AUTO — —
S O U R C E
( H D T V ( 1 0 8 0 i ) )
A U T O
N T S C ( 4 8 0 i )
S D T V ( 4 8 0 p )
H D T V ( 7 2 0 p )
H D T V ( 1 0 8 0 i )
P A L / S E C A M
P C - 9 8
V G A 1
V G A 3
M A C 1 3
V G A V E S A S V G A 1
S V G A 2
M A C 1 6
X G A 1
X G A 2
M A C 1 9
M A C 2 1
S X G A 1
S X G A 2
S X G A 3
U S E R
The display in ( )
shows the
currently set
status.
(SOURCE menu)
(To be continued on the next page)
DLA-M5000LE&SCE Eng Re.book Page 43 Tuesday, March 12, 2002 3:59 PM