JVC DLA-M5000LE - Manuel (Page 35)

33
Operating the Main Menu
ENGLI
S
H
DEUTSH
FRAN
Ç
AIS
ITALIANO
ESPA
Ñ
OL
DLA-M5000CLE (Re)/ LCT0979-002A / ENGLISH
Changing the Color System
■ Remote control unit
■ Main menu
Note
• When computer-related signal is input, the display of the
color system is changed to gray color, making operation
impossible. When video signals from AV devices are input,
the item for the color system can be set.
AUTO is set for the color system when the projector is
shipped from the factory. Normally, use it in AUTO. If
operation in AUTO is unstable such as with color not being
shown, set to a dedicated color system in accordance with
the color system of the signal being input.
1
Press the MENU/ENTER button.
• The main menu is shown on the screen.
2 Press MENU/ENTER toward the 5 or ∞
mark to select “DECODER”.
• The selected item (displayed in text) is shown in
magenta color on the screen.
3
Press MENU/ENTER toward the 2 or 3
mark to set.
• Each time you press MENU/ENTER toward the 2 or 3
mark, the color system changes as follows:
3: Forward / 2: Backward
Memo
About automatic signal identification
• AUTO is selected when shipped from the factory. In AUTO,
the color system (DECODER) of the signal being input is
automatically identified and indicated in ( ). Refer to the
main menu display.
• If operation in AUTO is unstable such as with color not
being shown, set to a dedicated color system in
accordance with the color system of the signal being input.
When the dedicated color system is set, be careful as
automatic identification does not work.
■ To finish the main menu, press the PAGE
BACK button.
MEN
U/E
N T E R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
U T +
D W –
RGB/COMPUTER
LENS
LOCK
UNLOCK
PAGE BACK PAGE BACK button
MENU/ENTER button
N T S C ( 4 8 0 i )
E N G L I S H
P I X E L C L O C K
P O S I T I O N
P I C T U R E
O P T I O N S
S O U R C E
C H A N N E L
U S E R S O U R C E S E T U P
D I S P L A Y S I Z E
D E C O D E R
L A N G U A G E
Y P B P R
C H : 1
H D T V ( 1 0 8 0 i )
Color system (DECODER) display
AUTO Normally, set to AUTO. The
color system of a signal being
input is automatically identified.
NTSC(480i) Dedicated to NTSC(480i).
NTSC4.43 Dedicated to NTSC4.43.
PAL Dedicated to PAL.
SECAM Dedicated to SECAM.
DLA-M5000LE&SCE Eng Re.book Page 33 Tuesday, March 12, 2002 3:59 PM