JVC DLA-M5000LE - Manuel (Page 28)

26
Basic Operations
DLA-M5000CLE (Re)/ LCT0979-002A / ENGLISH
■ Projector’s buttons
■ Remote control unit
4. Adjust focus
■ Adjust focus with the remote control’s
FOCUS (+/–) buttons.
When adjusting the focus with the FOCUS buttons, set
the LENS LOCK
j UNLOCK switch to the UNLOCK
position.
Note
• Focus adjustment can also be made on the setting menu.
For operating the setting menu, refer to “Making Basic
Settings” on page 29.
For Operating Other Functions
■ To use the quick alignment function
The quick alignment function is used to automatically
adjust (set) the screen settings of “TRACKING, PHASE,
H. POS. and V. POS.” of computer system input video.
• Use either the remote control’s or projector’s button.
When using the remote control unit:
Press the QUICK ALIGN. button.
When using the projector:
Clear the menu display, and press the projector’s QUICK
ALIGN. “+
+ + +” and “- - - -” buttons at the same time.
* During the automatic adjustment, “QUICK-ALIGNMENT”
(Quick-Alignment) appears on the screen and
disappears automatically after the adjustment is
completed.
Note
• This function works only for computer system inputs.
CAUTION
• When performing automatic adjustment using the
quick alignment function:
Use a bright, still-picture screen. It may not function
correctly on a dark or motion-picture screen.
If the condition adjusted by using the quick alignment
function is not good, manually adjust TRACKING, PHASE,
H. POS. and V. POS. (see pages 29, 35 and 36).
EMERGENCY AV RGB SETTING QUICK
ALIGN.
QUICK ALIGN. button
MEN
U/E
N T E R
QUICK
ALIGN.
AV HIDE
OPERATE
PRESET
AV
SHIFT ZOOM FOCUS
LENS
U T +
D W –
RGB/COMPUTER
LENS
LOCK
UNLOCK
PAGE BACK
LENS LOCK j UNLOCK switch
QUICK ALIGN. button
FOCUS (+/–) buttons
FOCUS
+
–
Remote control unit
QUICK
ALIGN.
QUICK
ALIGN.
Q U I C K - A L I G N M E N T
Remote control unit Projector
Screen display
DLA-M5000LE&SCE Eng Re.book Page 26 Tuesday, March 12, 2002 3:59 PM