Sony MHC-C9EX - Manuel (Page 16)

6
Press • REC.
Deck B stands by for recording.
The O- (for front side) or <1 (for
reverse side) indicator lights steadily
and shows you which side will start
recording. The other indicator flashes
for a few seconds, then disappears.
7
If the indicator for the side you want to
start recording does not light, press O
or <1 to light the side to start recording.
If it lights, skip to step 8.
8 Press II PAUSE on the tape player to
release recording pause.
Recording starts. You can also start
recording by pressing O or O.
9
Press O on the CD player.
The CD player starts playing.
-» continued
16
To Press
Stop recording ■ on the deck B
Pause recording II PAUSE on the
deck B
Stop CD play □ on the CD player
Pause CD play DO on the CD player
Adjusting the volume will not affect the
recording level
But this control will change the sound
levels you hear through speakers or
headphones.
Inserting a Blank Space
During Recording
Use this function when you want to insert a
blank space during recording.
Use the buttons on the unit to do this
operation.
1 Press O REC MUTE while recording at
the position where you want to insert the
blank space.
The indicator for #REC flashes and the
tape runs without recording. After about
4 seconds, the indicators for #REC and
II PAUSE light, and the unit enters the
recording pause mode.
2
Press II PAUSE at the position where
you want to start recording again.
Recording restarts.
To make a blank of more than 4
seconds
Press O REC MUTE for as long as needed.
The indicator for 9 REC flashes faster after
4 seconds have elapsed. The tape pauses
when you release
O REC MUTE.
To make a blank within 4 seconds
Press II PAUSE while the indicator for
9 REC is flashing.
Recording a CD:
Selecting Tape Length
Automatically (tape
select edit)
You can have the stereo system select and
indicate the most suitable tape length for
recording each CD automatically.
You cannot use tape select edit for CDs
which contain 32 tracks or more.
7
6
3
1
Press ^ OPEN/CLOSE on the CD player
and place a CD on the tray. Then press
^ OPEN/CLOSE again to close the tray.
If necessary, press DISC SKIP on the
remote to choose a CD.
The total number of tracks and total
playing time appear in the display.
2
Press EDIT.
"TAPE SELECT" appears in the
display, and the player divides the
tracks automatically.
Then the display changes as follows:
Total playing time for side A
3
Insert a blank tape of the indicated
tape length (or a longer tape) into deck
B.
4 Select dual or single-sided recording.
To record Set DIRECTION to
One side
Both sides* CID or RELAY
* Recording always stops at the end of
the reverse side. Be sure to start from
the front side.
5
Press CD SYNCHRO.
Deck B stands by for recording.
The O (for front side) or <1 (for
reverse side) indicator lights steadily
and shows you which side will start
recording. The other indicator flashes
for a few seconds, then disappears.
6
If the indicator for the side you want to
start recording does not light, press O
or <1 to light the side to start
recording.
If it lights, skip to step 7.
7
Press II PAUSE on the tape player to
release recording pause.
Recording starts.
To Press
Stop recording ■
Resume play CONTINUE
Check the program CHECK
I Chanter 4; the Tape Player