Listening to the radio, When the desired station is not tuned in, To improve am broadcast reception – Sony MHC-C9EX Manuel d'utilisation
Page 12: To change the am tuning intervai, When an fm program is not clear to receive, One touch play feature, Automatic source selection, The radio, Chapter 3
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
Chapter 3:
the
Radio
Listening to the Radio
Presetting Radio Stations
Playing Preset Radio
Stations
12
Listening to the
Radio
When you want to play a radio program,
you can have the tuner automatically scan
the radio frequencies and tune in the
stations with clear signals. This feature
saves you time in searching for stations
with clear signals. However, stations with
weak signals may be skipped by automatic
tuning. Manually tune in the ones skipped
by automatic tuning.
the band you want appears in the
display.
As you press this button, the band
changes as follows:
FM • •AM
2
Press MODE repeatedly until the AUTO
indicator lights up.
3
Keep turning MULTI CONTROLLER.
The tuner starts scanning radio
frequencies automatically, and stops
when it finds a clear station. "TUNED"
appears in the display. "STEREO" also
appears if the FM station tuned is
broadcast in stereo.
4
If you don't want to listen to the station
selected, repeat step 3.
When the desired station is not
tuned in
Automatic tuning may skip stations with
weak signals and continue scanning
without stop. In this case, tune in the
station manually.
1 Press MODE repeatedly until the
TUNING indicator lights up.
2 Turn MULTI CONTROLLER until the
desired station is tuned in.
To improve AM broadcast reception
Reorient the supplied AM loop antenna for
AM.
To change the AM tuning intervai
The AM tuning interval is preset to 10 kHz
in the factory. If you need to change the
interval, do as follows:
1 Turn on the power.
2 Change the band to AM.
3 Turn off the power.
4 Turn the power back on while pressing
MEMORY/NEXT.
After changing the AM tuning interval,
reset the preset AM radio stations. To reset
the interval to the factory setting, follow the
same procedure.
When an FM program is not clear to receive
Press STEREO/MONO so that "MONO"
appears in the display. There will be no
stereo effect, but the reception will
improve. Press STEREO/MONO again to
restore the stereo effect.
One Touch Play feature
Press TUNER/BAND when the power is
off. You will be able to start listening to the
last received station without pressing any
other buttons.
Automatic Source Selection
If you press TUNER/BAND while listening
to another source, the tuner is selected and
you will be able to start listening to the last
received station automatically.
Chapter 3: the Radio