Mise en route / start-up – Sulky Maxidrill TRW 4/6 m central metering unit Manuel d'utilisation
Page 21

19
FR
GB
Mise en route / Start-up
1
2
D
Tracteur (suite)
b) Préparation du tracteur
- Afin de limiter la compaction, le tracteur doit
être équipé de roues larges.
- Ajuster la pression au niveau le plus bas
acceptable par les pneumatiques
Nous vous conseillons un équipement en roues basse
pression de 800 mm pour tracter le semoir.
Le jumelage de roues arrière est recommandé en cas
de travail sur labour.
Puissance de traction recommandée (à titre indicatif)
c) Frein de service hydraulique
P
OUR
BRANCHER
LE
FREIN
DE
SERVICE
- Nettoyer l'embout de conduite hydraulique
- Connecter la prise côté machine sur la prise
de freinage du tracteur
- Assurez-vous du fonctionnement de vos freins
avant de prendre la route
P
OUR
DÉBRANCHER
LE
FREIN
DE
SERVICE
- Immobiliser la machine (serrer le frein de parking)
- Débrancher la conduite de freinage du tracteur
- Reposer la prise coté machine sur son support
D
Tractor (continued)
b) Preparing the tractor
- In order to reduce compaction, the tractor should
be fitted with wide wheels.
- Adjust the tyre pressures to their lowest
permissible level
We recommend that you use 800 mm low-pressure
wheels for towing the seed drill.
We recommend that you use dual wheels if working in
a ploughed field.
Recommended tractor power (for information only)
c) Hydraulic service brake
T
O
CONNECT
THE
SERVICE
BRAKE
- Clean the end fitting on the hydraulic line
- Plug the machine-side connector into the braking
system connector on the tractor
- Ensure that the brakes are working properly before
taking to the road
T
O
DISCONNECT
THE
SERVICE
BRAKE
- Immobilise the machine (apply the parking brake)
- Disconnect the brake line on the tractor
- Replace the machine-side connector in its housing
Optimum conditions
On sloping
In sticky
in a level field
land
conditions
TRW 4000
150 hp
190 hp
220 hp
TRW 6000
190 hp
250 hp
300 hp
Conditions optimum
Terrain en
Conditions
champs plats
Pente
collantes
TRW 4000
150 CV
190 CV
220 CV
TRW 6000
190 CV
250 CV
300 CV