Sony DCR-IP1E - Manuel (Page 70)

Using the Menu 70
DCR-IP1E
3-084-862-12(1)
E:\CX4800\revision2\SDL\updated1_final_Delivery\EU\GB.FR\3084862121DCR-IP1ECEE\01GB06MENU.fm
master:Right
INFO DISP
BEEP
DISPLAY
b Note
• You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO while
[V-OUT/PANEL] is selected.
MENU ROTATE
You can select the scrolling direction (up and down) of the menu items on the
LCD screen when you touch
or on the screen.
G ON Select to display the cassette information for about 5 seconds:
– After the POWER switch is set to the CAMERA-TAPE
mode and the cassette is inserted.
– When the POWER switch is set to the PLAY/EDIT mode.
OFF Select when you do not want to display the cassette information.
G MELODY Select to sound a melody when you start/stop recording, when
executing any operation on the touch panel or when an unusual
condition occurs on your camcorder.
NORMAL Select to sound a beep instead of the melody.
OFF Select to cancel the melody, the beep sound, the shutter sound or the
confirmation beep sound for operation on the touch panel.
G LCD PANEL Select to show the displays such as the tape counter on the LCD
screen.
V-OUT/PANEL Select to show the displays such as the tape counter on the TV screen
and the LCD screen.
G NORMAL Select to scroll the menu items downwards by touching .
OPPOSITE Select to scroll the menu items upwards by touching .
GRADUATION
RECORDED AREA
15 01 2004
INFO DISP ID 00002
01 01 2004 10:00
15:00
The unique number of each cassette. Your camcorder
automatically assign this number. You can not change this
number.
The cassette title set by [
TAPE TITLE] in the menu settings
(Cassette label).
The first-recorded date in this cassette.
The last-recorded date in this cassette.
The recorded area is indicated by the yellow-green bar.