P. 69), Remaining remote ctrl, Rec led – Sony DCR-IP1E Manuel d'utilisation
Page 69
Using the Menu
E:\CX4800\revision2\SDL\updated1_final_Delivery\EU\GB.FR\3084862121DCR-IP1ECEE\01GB06MENU.fm
master:Right
Usi
n
g
t
he M
enu
69
DCR-IP1E
3-084-862-12(1)
REMAINING
REMOTE CTRL
b
Note
• The setting returns to [ON] when you disconnect the power source from your camcorder
for more than 5 minutes.
REC LED
G
AUTO
Select to display the remaining tape indicator for about 8 seconds:
– After the POWER switch is set to the PLAY/EDIT or
CAMERA-TAPE mode with the cassette inserted, and
your camcorder calculates the remaining amount of tape.
– When you touch
(play/pause).
ON
Select to always display the remaining tape indicator.
G
ON
Select when using the Remote Commander supplied with your
camcorder
OFF
Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
G
ON
Select to turn on the camera recording lamp on the front of your
camcorder during recording
OFF
Select this setting in the following recording situations. The camera
recording lamp will not light up during recording.
– When you do not want the subject to be nervous about
being recorded.
– When you are recording close to the subject.
– When the subject reflects the recording lamp.
,
continued