Sony DCR-IP1E - Manuel (Page 45)

Playback
E:\CX4800\revision2\SDL\updated1_final_Delivery\EU\GB.FR\3084862121DCR-IP1ECEE\01GB05PLAY.fm
master:Right
P
layba
ck
45
DCR-IP1E
3-084-862-12(1)
Playing the picture on
a TV
Connect your camcorder via the Handycam
Station or the AUDIO/VIDEO jack of your
camcorder to a TV using the supplied A/V
connecting cable.
Connect the supplied AC Adaptor to the wall
socket for the power supply (p. 16).
Refer also to the instruction manuals supplied
with the devices to be connected.
To copy to another tape, see page 78.
*1The supplied A/V connecting cable has a video plug
and an S video plug for the video connection.
*2You can play back images clearly when using an S
video connection. When there is an S video jack on
the device to be connected, connect the S video
plug to that jack instead of using the yellow video
plug. This connection produces higher quality
MICROMV format pictures. The audio will not be
output when you connect with the S video plug
alone.
When your TV is connected to a VCR
Connect your camcorder to the LINE IN input
on the VCR using the A/V connecting cable. Set
the input selector on the VCR to LINE.
When your TV is monaural (When your
TV has only one audio input jack)
Connect the yellow plug of the A/V connecting
cable to the video input jack and connect the
white or the red plug to the audio input jack of
your TV or VCR.
If your TV/VCR has a 21-pin connector
(EUROCONNECTOR)
Use the 21-pin adaptor supplied with your
camcorder. (For models with the
mark
printed on their bottom surfaces only). This
adaptor is designed for output use only.
0
AUDIO
VIDEO
S VIDEO
IN
AUDIO/
VIDEO
Signal flow
AUDIO/VIDEO jack
A/V connecting cable (supplied) *1 TVs or VCRs
Yellow
White
Red
Used when you have an S video jack on your
TV or VCR. *2
S video plug
(Black)
To the audio/video
input jacks
TV