Option menu, Input guide, Startup logo – Panasonic PT-LB51SU Manuel d'utilisation

Page 34: Function button, Computer2 select, Lamp power, Computer2 select lamp power, Nglish - 34, Settings

Advertising
background image

E

NGLISH - 34

Settings

OPTION menu

When the input signal is changed, the input signal
information will be displayed in the upper right corner of
the projected images. You can select the level of the
input signal information.

You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select the
required option.

ON

Active

OFF

Deactive

You can assign frequently-used operations to the
FUNCTION

button on the projector and use it as a

convenient shortcut button. The functions which can be
set are “SHUTTER”, “AUTO SETUP”, “PICTURE
MODE

”, “FREEZE” and “INDEX WINDOW”.

Use I H to select the function to assign to the
FUNCTION

button.

You can switch the function of the COMPUTER2 IN/
1 OUT

terminal.

INPUT

COMPUTER2 IN

OUTPUT

COMPUTER1 OUT

This setting changes the lamp brightness. When set to
ECO-MODE”, the luminance of the lamp is reduced, but
the projector uses less power, and the operating noise is
also reduced. This can help to extend the lamp’s
operating life. If using the projector in small rooms where
high luminance is not required, it is recommended that
you set the “LAMP POWER” to “ECO-MODE”.

STANDARD

Normal mode

ECO-MODE

ECO mode

INPUT GUIDE

Options

Function

OFF

The input signal information will not
be displayed.

SIMPLE

Only the name of the input signal will
be displayed.

DETAILED

The input signal information will be
displayed in detail.

NOTE:

• If “INPUT GUIDE” is set to “DETAILED”, the guide

screen for computer connection will be displayed when
COMPUTER1

or COMPUTER2 is selected and no

signal is being input to the COMPUTER1 IN or
COMPUTER2 IN

connector. If you would like the guide

screen not to be displayed, set “INPUT GUIDE” to
SIMPLE” or “OFF”.

STARTUP LOGO

Remote control

Control panel

See “Navigating through the MENU” on page 27.

See “Main menu and Sub-menu” on page 28.

FUNCTION BUTTON

SHUTTER

Operates the shutter function
See “SHUTTER” on page 36

AUTO SETUP

Starts the automatic position
correction function
See “AUTO SETUP” on
page 35

PICTURE MODE

Switches the picture mode
See “PICTURE MODE” on
page 30.

FREEZE

Operates the freeze function
See “Capturing an image” on
page 24

INDEX WINDOW

Operates the INDEX-
WINDOW function
See “INDEX-WINDOW” on
page 36

COMPUTER2 SELECT

LAMP POWER

NOTE:

• “LAMP POWER” cannot be set when no signal is being

input.

SHUTTER

INDEX WINDOW

PICTURE MODE

FREEZE

AUTO SETUP

Advertising