Switching the input signal, Capturing an image, Stopping the projection temporary – Panasonic PT-LB51SU Manuel d'utilisation

Page 24: Ed. see “switching the input, St opping the projection temporary, Nglish - 24, Remote control operation

Advertising
background image

B

asi

c Op

eration

Remote control operation

E

NGLISH - 24

You can switch the input method manually by
pressing the COMPUTER, WIRELESS (PT-
LB51NTU only) and VIDEO buttons. Press
the required button several times or I H to
cycle through the input methods as follows.
The actual projected image will be changed
in a while.

J Pressing the COMPUTER button

J Pressing the WIRELESS button

The WIRELESS

button is only for PT-LB51NTU.

See CD-ROM contents for more detailed information.

J Pressing the VIDEO button

J Pressing the INPUT SELECT

button on the projector

WIRELESS

is only for PT-LB51NTU.

When projecting an image, press FREEZE to
capture the projected image and display it on
the screen as a still picture. Press again to
escape. While the image is frozen, the sound
will be stopped.

The “SHUTTER” function can be used to
momentarily turn off the picture and sound
from the projector when the projector is not
being used for short periods of time, such as
during breaks in meetings or when carrying out
preparation. The projector uses less power in
“SHUTTER” mode than it does in normal
projection mode.

Switching the input signal

NOTE:

• Only when the COMPUTER2 SELECT is set to INPUT,

you can switch between COMPUTER1 and
COMPUTER2

.

COMPUTER1

COMPUTER2

VIDEO

S-VIDEO

COMPUTER1

WIRELESS

S-VIDEO

VIDEO

COMPUTER2

NOTE:

See “List of compatible signals” on page 44.
See “Connections” on page 18.

Capturing an image

NOTE:

• Press the FREEZE button to return to the projection.
• When FUNCTION BUTTON is set to "FREEZE" (see

“FUNCTION BUTTON” on page 34), the FREEZE
operation can also be carried out by pressing the
FUNCTION

button at the front of the projector.

Stopping the projection temporary

NOTE:

• Escaping from the shutter mode is available by

pressing any button.

• This operation can also be carried out using the

SHUTTER

command in the MAIN MENU.

See “SHUTTER” on page 36.

• When FUNCTION BUTTON is set to "SHUTTER" (see

“FUNCTION BUTTON” on page 34), the SHUTTER
operation can also be carried out by pressing the
FUNCTION

button at the front of the projector.

Advertising