Resetting to the factory default settings, Projecting an image in index-window mode, Nglish - 25 – Panasonic PT-LB51SU Manuel d'utilisation

Page 25: Remote control operation

Advertising
background image

Basic O

p

eration

Remote control operation

E

NGLISH - 25

You can reset most of the customised settings
to the factory defaults by pressing DEFAULT
button of the Remote control. Display the
required sub menu or the menu items and
press the DEFAULT button again.

See “Main menu and Sub-menu” on page 28.

You can project an image in split 2 windows
as an INDEX-WINDOW, one is frozen, stored
in memory and displayed on the screen’s left
side, while the display of subsequent images
continues on the right.
To escape from the INDEX-WINDOW, press
the RETURN button.

Q Switching the position

In default, the frozen image is displayed on the left
and the subsequent image is displayed on the
right. Press I H to switch the position.

Q Changing the image size

Press F G to switch and cycle through in 3 size.

Q Capturing a new image

While in INDEX-WINDOW mode, press ENTER to
capture a new image and the frozen image window
will be updated in a while.

Resetting to the factory default settings

NOTE:

• Some menu items are not available to reset by pressing

the DEFAULT button. Adjust each menu items
manually.

Projecting an image in INDEX-WINDOW mode

Projected image

Frozen image

Continuing image

Frozen image

Continuing image

Continuing image

Frozen image

NOTE:

• If you change the window size, the aspect ratio of the

image is changed and becomes vertically elongated.

• This operation can also be carried out using the

INDEX-WINDOW

command in the MAIN MENU.

See “INDEX-WINDOW” on page 36.

• When FUNCTION BUTTON is set to “INDEX

WINDOW” (see “FUNCTION BUTTON” on page 34),
the INDEX-WINDOW operation can also be carried out
by pressing the FUNCTION button at the front of the
projector.

Frozen image

Continuing image

Advertising