Sony DSR-50 - Manuel (Page 89)

Chapter 6 Adjusting and Setting Through Menus
Chapter 6 Adjusting and Setting Through Menus
89
(GB)
A AUDIO SET
Icon/Menu
Submenu
Setting
(page)
LIMITER Turns the limiter on/off.
OFF : No limiter
ON: Uses the limiter.
Notes
• This setting is disabled when inputting signals from the DV IN/OUT connector.
• This setting is available only when you have set the AUDIO SELECT switches on the front
panel to MANU.
• Make sure to set the audio input level control selectors on the right panel correctly. Even if
you have set this item to ON, the limiter will not work for a sound that exceeds the dynamic
range of the input amplifier.
WIND
(page 21 (GB)) Enables/disables the wind noise reduction function for microphones.
You can set the wind noise reduction for audio channels 1 to 4 separately. If you select this
item, the channel to which the noise reduction is currently applied is displayed. (Example: If
noise reduction is applied to channels 1 and 3, “CH1,3” is displayed. If all channels are set
to OFF, “OFF” is displayed.)
OFF : No wind noise reduction
ON: Wind noise reduction
If you press the SEL/PUSH EXEC dial, the channel names are displayed. Select the
channel to be changed, change the setting, then press the SEL/PUSH EXEC dial.
Note
This setting is disabled when inputting signals from the DV IN/OUT connector.
LCD SET menu
Icon/Menu
Submenu
Setting
(page)
LCD LCD SET LCD BRIGHT Adjusts the LCD monitor brightness. Rotate and press the SEL/PUSH EXEC dial to adjust
and set the brightness. You can also adjust the brightness by rotating the SEL/PUSH EXEC
dial on the TC screen. (The triangle under the bar is displayed in green when the setting is
set to the factory preset value.)
LCD COLOR
(for DSR-50) /
LCD COLOUR
(for DSR-50P) Adjusts the depth of color of the LCD monitor. Rotate and press the SEL/PUSH EXEC dial
to adjust and set the depth of color. (The triangle under the bar is displayed in green when
the setting is set to the factory preset value.)