Front panel, Location and function of parts – Sony DSR-50 Manuel d'utilisation

Page 10

Advertising
background image

10

(GB)

Chapter 1

Overview

Location and Function of Parts

Chapter 1 Overview

Location and Function of Parts

1

Cassette lid

To open the cassette lid, slide the OPEN switch 6 to
OPEN. The lid will click open. Raise the lid and insert
a cassette.

For details of usable cassettes, see “Notes on Video
Cassettes” on page 40 (GB).

2

RESET button

Press this button (bottom of unit) to initialize the
internal clock, all menu items and the time code of the
FREE RUN setting. Press this button with the tip of a
ball-point pen or similar tool.

3

Carrying handle

Use the handle to carry the unit.

4

LCD protection board installation screw hole

Use this hole to install the LCD protection board
(supplied).

Front Panel

5

POWER switch

Push up this switch to ON to turn on the power.

Note

Power to the camera cable is not interrupted even if
this switch has been turned off. If you are not going to
use the camera, turn off the power of the camera,
disconnect the camera cable and the DSR-50/50P AC
adaptor, or remove the battery pack.

6

OPEN switch

Slide this switch to the right (OPEN) to open the
cassette lid 1.

1

Cassette lid

2

RESET button (bottom of unit)

3

Carrying handle

1

Display window
(see page 11
(GB))

2

Tape transport
control section
(see page 13
(GB))

3

Audio control section (see page 15 (GB))

4

LCD protection board

installation screw hole
(bottom of unit)

4

Monitor display
section (see
page 16 (GB))

5

POWER switch

6

OPEN switch

Advertising
Ce manuel est liée aux produits suivants:

50P