Adjusting the input level, Adjusting signals – Sony DSR-50 Manuel d'utilisation

Page 68

Advertising
background image

Adjusting Signals

Chapter 4 Setting the Time Code and Adjusting the Video Signals

68

(GB)

Chapter 4

Setting the Time Code and Adjusting the Video Signals

Adjusting the chrominance signal gain level of the composite signal

1

Play back a tape to output the signals from the
VIDEO OUT2 connector.

The vectorscope displays the picture.

2

Adjust the chrominance signal gain level in PB
OUTPUT in VIDEO LVL on the VIDEO SET
menu.

For details on “PB OUTPUT”, see “VIDEO SET
menu” on page 85 (GB).

Adjusting the Input Level

Adjusting the camera component signal
level

1

Set the INPUT SELECT selector to CAMERA.

2

Stop the unit and set it to the EE mode.

The waveform monitor displays the picture.

Reference
signal generator /
Camera

or

or

DSR-50/50P

S VIDEO
IN

VIDEO/
REF.IN

CAMERA

VIDEO OUT2

COMPONENT OUTPUT

Composite
video input

Component
input

Waveform monitor

Composite
video output

Composite
video input

Vectorscope

3

Adjust the Y, R-Y, and B-Y signal levels in
INPUT in VIDEO LVL on the VIDEO SET menu.
Y LVL: Adjusts the Y signal level.
R-Y LVL: Adjusts the R-Y signal level.
B-Y LVL: Adjusts the B-Y signal level.

For details on “INPUT”, see “VIDEO SET menu” on
page 85 (GB).

Advertising
Ce manuel est liée aux produits suivants:

50P