Yamaha A-S3200 Stereo 200W Integrated Amplifier (Silver) - Manuel (Page 24)

24
Appendix
Specifications
Rated output power (20 Hz to 20 kHz, 0.07% THD)
2-channel driven
[Model for Asia]
8 Ω ............................................................ 90 W + 90 W
4 Ω ........................................................ 145 W + 145 W
[Other models]
8 Ω ........................................................ 100 W + 100 W
4 Ω ........................................................ 150 W + 150 W
Dynamic power
[Model for Asia]
8 Ω ........................................................ 100 W + 100 W
6 Ω ........................................................ 130 W + 130 W
4 Ω ........................................................ 180 W + 180 W
2 Ω ........................................................ 290 W + 290 W
[Other models]
8 Ω ........................................................ 120 W + 120 W
6 Ω ........................................................ 150 W + 150 W
4 Ω ........................................................ 200 W + 200 W
2 Ω ........................................................ 300 W + 300 W
IEC output power (1 kHz, 0.07% THD)
[Models for U.K. and Europe]
8 Ω ........................................................ 105 W + 105 W
Maximum effective output power
(JEITA, 1 kHz, 10% THD)
[Model for Asia]
8 Ω .........................................................110 W + 110 W
4 Ω ........................................................ 190 W + 190 W
[Other models]
8 Ω ........................................................ 130 W + 130 W
4 Ω ........................................................ 210 W + 210 W
Power bandwidth (0.1% THD, 50 W)
2-channel driven
8 Ω ........................................................10 Hz to 50 kHz
Damping factor (1 kHz)
8 Ω .............................................................250 or higher
Input sensitivity / input impedance (1 kHz, 100 W/8Ω)
PHONO (MC).................................... 150 μ Vrms / 50 Ω
PHONO (MM)................................ 3.5 mVrms / 47 k Ω
CD (or similar)............................... 200 mVrms / 47 k Ω
MAIN IN .............................................. 1 Vrms / 47 k Ω
BAL 1/BAL 2 .............................. 200 mVrms / 100 k Ω
Maximum input / signal voltage (1 kHz, 0.5% THD)
PHONO (MC).............................................. 2.0 mVrms
PHONO (MM).............................................. 50 mVrms
CD (or similar).............................................. 2.80 Vrms
BAL 1/BAL 2
BYPASS..................................................... 2.80 Vrms
ATT. (
− 6 dB).............................................. 5.60 Vrms
Rated output voltage / output impedance
LINE 2 OUT ................................. 200 mVrms / 1.5 k Ω
PRE OUT............................................. 1 Vrms / 1.5 k Ω
Headphone jack rated output power
(1 kHz, 32Ω, 0.2% THD)
...........................................................50 mW + 50 mW
Frequency response
5 Hz to 100 kHz............................................+0 / − 3 dB
20 Hz to 20 kHz.........................................+0 / − 0.3 dB
Deviations from RIAA equalizer
PHONO (MM/MC) .......................................... ±0.5 dB
Total harmonic distortion plus noise
(JEITA, input 0.5 V, 20 Hz to 20 kHz)
2-channel driven
PHONO (MC) → LINE 2 OUT, 1.2 Vrms ..........0.02%
PHONO (MM) → LINE 2 OUT, 1.2 Vrms .......0.005%
CD (or similar)/BAL 1/BAL 2 →
SPEAKERS OUT, 50 W/8 Ω ..............................0.035%
Signal-to-noise ratio (JEITA, IHF-A network)
PHONO (MC)...................................................... 90 dB
PHONO (MM)..................................................... 96 dB
CD (or similar)................................................... 110 dB
BAL 1/BAL 2 .................................................... 114 dB