Softstart function, Serial communication – Celduc Temperature controller ECOM Manuel d'utilisation
Page 52
User manual - ECOM0010
The parameter
FRFW
has the same meaning as the heating
cycle time
WF
Parameter 24
FRFW
(Cooling Fluid – word 2024) pre-selects
the proportional band multiplier
SEP
and the cooling PID
cycle time
FRFW
based on the type of cooling fluid:
FRRI
Cooling fluid
type
SEP
FRFW
$LU
Air
1.00
10
RL/
Oil
1.25
4
+R
Water
2.50
2
Once the parameter
FRRI
is selected, parameters
SEP
,
RXGE
and
FRFW
can however be modified.
6.8
Softstart function
ECOM0010 integrates the Softstart function: on parameter
TPGUTUBSU UISFTIPME
JU JT QPTTJCMF UP TFMFDU UIF UISFTIPME
under which the softstart is activated at starting. Parameter
TFMFDUTUIFPVUQVUQFSDFOUBHF UP
UIBUUIFDPOUSPMMFS
will keep until the process exceeds threshold selected on
QBSBNFUFSPSVOUJMUIFUJNFTFMFDUFEJONJOVUFTPO
QBSBNFUFSXJMMFYQJSF
7
Serial communication
ECOM0010 is fitted with RS485 serial link and can receive/
broadcast data via serial communication using MODBUS RTU
protocol.
The device can only be configured as a Slave.
This function enables the control of multiple controllers
connected to a supervisory system/SCADA.
Each controller responds to a Master query only if the query
contains the same address as parameter 29
6/DG
. The
valid addresses range from 1 to 254 and there must not be