About the control a1 control system, Note, Compatibility with the former control a system – Sony MDS-JA20ES Manuel d'utilisation

Page 6: T0cdp-cxi53 (control a), To the control al component, Stereo, Mono, Connecting the control al control system, Amplifier md (receiver) deck, Tape other deck component

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Getting Started

About the CONTROL A1 Control
System

This MD deck is compatible with the CONTROL A1
Control System.
The CONTROL A1 Control System was designed to
simplify the operation of audio systems composed of
separate Sony components. CONTROL A1
connections provide a path for the transmission of

, control signals which enable automatic operation and

control features usually associated with integrated
systems.
Currently, CONTROL A1 connections between a Sony

MD deck, CD player, amplifier (receiv'er), and cassette

deck provide automatic function selection and
synchronized recording.

Note
The CONTROL A1 Control System is designed to maintain
upward compatibility as the Control System is upgraded to
handle new functions. In this case, however, older
components will not be compatible with the new functions.

Compatibility with the former CONTROL A System

Although the CDP-CX153 is equipped with a
CONTROL A terminal, it can be connected to
CONTROL A1 components using a special
connecting cable*.
The CdP-CXTSl however, cannot be connected to
CONTROL Al.

* Use the Sony RK-G139HG (1 meter (39 in]) monaural

mini-plug <—► stereo mini-plug connecting cable or a
similar cable (less than 2 meters [78 in] long with no
resistance).

T

0

CDP-CXI

53

(CONTROL A)

To the CONTROL
Al component

■°°=n IL>-

-c3l TN

p

-

STEREO

MONO

Be sure to connect the STEREO mini-plug to the
CONTROL A component and the MONO mini-plug
to the CONTROL Al component.

Connecting the CONTROL Al Control
System

Connect the CONTROL Al cables in series to the
CONTROL Al jacks on the back of each component.

Be sure to connect a CONTROL Al compatible
amplifier (receiver) to take advantage of the
automatic function selection feature.

£

-ITTl-CTLE

iT"

Amplifier

MD

(receiver) deck

CD

player

Tape Other

deck component

The components can be connected in any order.
You can connect up to ten CONTROL Al compatible
components.
The CONTROL Al functions will work when the
component you want to operate is turned on, even if
all of the connected components are not turned on.

As a rule, the CONTROL Al remote control system
should not incorporate more than one of each type of
component (i.e., 1 MD deck, 1 CD player, 1 tape deck
and 1 receiver). You may, however, be able to
connect more than one of certain CD players. Refer
to the operating instructions supplied with the
respective component for details.

About the CONTROL Al cable

• Use a commercially available 2P (mono) mini-plug cable

less than 2 meters (78 V* in) long, with a maximum outer
diameter no greater than 11 mm C/u in), and no
resistance. Some CONTROL Al compatible components
are supplied with a CONTROL Al cable as an accessory.

• If a component has more than one CONTROL Al jack, you

can use either one, or connect a different component to
each jack.

"S-LINK" is a general name for Sony's Bus System, and
includes the CONTROL Al Control System.

Advertising