Sony MDS-JA20ES - Manuel (Page 57)

Additional Information
Table of Setup Menus
You can make v arious settings on this deck by using Setup Menus. Operation related to each menu were explained
in the previous sections. The table below outlines each menu, including the various parameters and initial settings.
Note
The menus you can use in stop mode, during play or while recording differ.
To enter the Setup Menu
While the deck is stopped, press MENU/NO twice to display "Setup Menu",
or
press MENU/NO to display "Edit Menu" and turn AMS until "Setup ?" appears in the
display, then press AMS.
Menu number Function Parameters Initial setting See
01 Creates a program. — — page 29
02 Sets the track marking function. T.Mark Off, T.Mark LSyn T.Mark LSyn page 17
03 Sets the reference level of the input
signal when "T.Mark LSyn" is
selected in Setup Menu 02. LS(T) -72 to -OdB LS(T) -50dB page 17
04 Turns the Auto Space and Auto
Pause Functions on and off. Auto Off, Auto Space, Auto Pause Auto Off pages 30
and 31
05 Turns the Smart Space and Auto
Cut Functions on and off. S.Space Off, S.Space On S.Space On page 15
06 Turns the Peak Hold Function on
and off for the peak level meters. P.Hold On, P.Hold Off P.Hold Off page 16
07 Sets the playing time during music
Stan. M.Scan 6 to 20s M.Scan 6s page 26
08 Sets the duration of fade-in
recording and playback. F.in 1.0 to 15.0s F.in 5.0s page 21
09 Sets the duration of fade-out
recording and playback.
F.out 1.0 to 15.0s F.out 5.0s page 21
10 Changes the playback speed by
auto steps. Pitch -48 to +2 Pitch 0 page 33
11 Fine controls the playback speed. Pfine -98.5% to +12.5% Pfine 0.0% page 34
12 Changes the bit length of the digital
input signal.
Din 24bit/20bit/16bit Din 20bit page 15
13 Changes the bit length of the digital
output signal. Dout 24bit/20bit/16bit Dout 20bit page 34
14 Sets the duration of the Sleep Timer. Sleep 30 to 120min Sleep óOmin page 33
15 Turns the Sleep Timer Function on
and off. Slefip On, Sleep Off Sleep Off page 33
16 Sets the recording mode. Stereo Ree/Mono Ree Stereo Ree page 10
To return the settings to the initial values
Press CLEAR.
58^