Erasing a part of a track (a>b erase function), Example: erasing a part of track a, To cancel the a-b erase function – Sony MDS-JA20ES Manuel d'utilisation

Page 42: Note, Erasing a part of a track (a-b erase function), Editing recorded mds

Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".

Advertising
background image

Editing Recorded MDs

Erasing a Part of a Track (A>B
Erase Function)

You can specify a portion within a track and erase the
portion with ease. It is convenient v\^en erasing
unnecessary sections after recording satellite broadcast
or FM broadcast.

Example: Erasing a part of track A

Point A Point B

Track
number

Erasing

o

1

2 3

A

#1

A

#2

A
#3

B

c

1

/ /2 /3

A (#1+#3)

B

c

IKK AMS >M

MENU/NO YES

1

While the deck'is stopped, playing, or pausing,

press MENU/NO to display "Edit Menu".

2

Turn AMS until "A-B Erase ?" appears in the

display.

3

Press AMS or YES.

4

Turn AMS to select the number of the track, then
press AMS or YES.

"-Rehearsal-" and "Point A ok?" alternates in the
display while the deck plays back the selected
track from the beginning.

5

While monitoring the sound, turn AMS to find the

starting point of the portion to be erased (point
A).
You can select the unit by which the starting point
is shifted. Press the ◄◄ or ►► button to select

frame*, second, or minute.
For frame, the number of frames appears when
you turn the AMS control; for second and minute,
"s" or "m" flashes in the display.

* 1 frame is about 12 ms.

6

If the point A is still incorrect, repeat Step 5 until

it is correct.

7

Press AMS or YES if the position is correct.

"Point B set" appears in the display and playback
for setting the end point of the portion to be erased
(point B) starts.

8

Continue playback (or press ◄◄ or ►►) until the
deck reaches point B, then press AMS or YES.

"A-B Ers" and "Point B ok?" alternates in the
display while the deck repeats a portion of a few
seconds before point A and after point B
successively.

9

Repeat Step 5 if point B is not correct,

10

Press AMS or YES when the position is correct.

"Complete!!" appears for a few seconds and the
portion between point A and B is erased.

To cancel the A-B Erase Function

Press MENU/NO or ■.

Note
If "Impossible" appears in the display, this means:
- You specified point B comes before point A..

Point B should be specified after point A.

- The specified portion cannot be erased.

This sometimes happens when you'v'e edited the same
track many times, and is due to a technical limitation of the
MD system, not a mechanical error.

43'

Advertising