To reset to the factory settings, Prevention of blooming and smear – Panasonic WV-CL834 Manuel d'utilisation
Page 38
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
To reset to the factory settings
1. Move the cursor to the CAMERA RESET parame
ter, The words PUSH SW start blinking.
2,
While holding down ^ and press E] for 2
seconds or longer. The camera is reset to the fac
tory settings.
To close the SPECIAL menu and return to the CAM
SET UP menu
Move the cursor to RET and press El •
To close the SPECIAL menu and return to the
camera picture
Move the cursor to END and press
El -
PREVENTION OF BLOOMING AND SMEAR
When the camera is aimed at a bright light, such as a
spotlight, or a surface that reflects bright light, smear
or blooming may appear. Therefore, the camera
should be operated carefully in the vicinity of extremely
bright objects to avoid smear or blooming.
-36-