Panasonic WV-CL834 - Manuel (Page 33)

• To reset COARSE and FINE to the values pre­
set at the factory, press ^ or simultane­
ously. COARSE and FINE adjustments are
preset at the factory to zero-crossing of the
AC line phase.
• If the AC line contains noise (spike noise,
etc.), the stability of the vertical phase of the
camera video output signal may be disturbed.
7. White Balance Setting (WHITE BAL)
7-1. Auto-Tracing White Balance Mode (ATW)
You can select one of tv/o modes for white balance
adjustment as follows:
• ATW (Auto Tracing White Balance)
In this mode, the color temperature is monitored
continuously and thereby white balance is set auto­
matically. The color temperature range for the prop­
er white balance is approximately 2 600 - 6 OOOK.
Proper white balance may not be obtained under
the foilowing conditions:
1. The color temperature is out of the 2 600 -
6 OOOK range.
2. When the scene contains mostly high color
temperature objects, such as a blue sky or
sunset
3. When the scene is dim.
In these cases, select the AWC mode.
Move the cursor to the WHITE BAL parameter and
select ATW. The white balance of the camera is
automatically set.
** CAH SET UP
**
CAHEKA TD OFF
AliC/EIiC ADC “1
SHUTTER OFF
AGC ON
SENS UP OFF
STillC IHT
WHITE BAI. ATW “1
MOTION DET OFF n
LENS DRIVE DC
HMD SET UP EKABliE
-31-