24 v ac power supply, Video cable, Caution – Panasonic WV-CL834 Manuel d'utilisation
Page 10
Attention! Le texte de ce document a été détectée automatiquement. Pour consulter le document original, vous pouvez utiliser le mode "Original".
2.
24 V AC Power Supply
Connect the power cable to the AC/DC compatible
input terminal on the rear panel of the camera.
DC tW « JJV
—c=y 24 VAC. 60 Hz
(19.5V-28 V)
Video Cable
1. It is recommended to use a monitor whose resolu
tion is at least equal to that of the camera.
2. Set the termination switch to the 75fl position on
the last monitor.
A, Use a 75Q coaxial cable.
B. Set the termination switch to the 75ii position
on the last monitor and to the Hi-Z position on
the other monitors. Do not change the posi
tions after setting.
Recommended wire gauge sizes for 24V AC tine.
Copper wire
size (AWG)
#24
(0.22mrT(=)
#22
(0,33mm0
#20
(0.52mnrV}
' #10
(0.83mmr)
Length
of Cable
(Approx.)
(m)
95
150
255
425
(ft)
314
495
842
1 403
Caution:
To prevent fire or electric shock hazard, a
UL listed wire (VW-1, style 1007) should be
used for the cable.
Monitor
© @ a
Monitor
© © B
C. The maximum extensible coaxial cable length
between the camera and the monitor is shown
below.
-
8
-