Panasonic WV-CL834 - Manuel (Page 37)

10. Special Menu (SPECIAL)
This menu lets you adjust and set up the video signal
of the camera to meet your requirements.
Move the cursor to END on the bottom line of the CAM
SET UP menu and press ^ or simultaneously for
2 seconds or longer. The SPECIAL menu appears on
the monitor as shown below.
/
** CAM SET OT * *
CAKERA ID
OFT
“1
ALC/ELC ALC "I
SHUTTER OFF
AGC OH
SENS UP OFF
SYNC XHT
WHITE BAL ATW "1
KOTIOH DET OFF 1
IiENS DRIVE DC
EtID SET OP SUABLE
k.
J
* *
SPECIAL *•
DP SIDE DOWN OFF
CHROHA
gain ______ .1___
AP GAIN _________ .1___
PEDESTAL .I. .
HOE ,1. ,
- +
CAKERA RESET ^ POSH SH
RET END
J
10-1. Camera Picture Upside Down Positioning
(UP SIDE DOWN)
1. Move the cursor to the UP SIDE DOWN parameter.
2. Select ON when you want to turn the picture
upside down.
10-2. Chroma Level Setting (CHROMA GAIN)
1. Move the cursor to the CHROMA GAIN parameter,
■ 2. While observing the vectorscope or color video
monitor, move the ‘:r’ cursor to adjust the chroma
level,
10-3. Aperture Gain Setting (AP GAIN)
1. Move the cursor to the AP GAIN parameter.
2. While observing the vectorscope or video monitor,
move the “I” cursor to adjust the aperture gain
level.
10-4. Pedestal Level Setting (PEDESTAL)
1. Move the cursor to the PEDESTAL parameter.
2. While observing the waveform monitor/osciilo-
scope or video monitor, move the “I" cursor to
adjust the pedestal level (black level).
10-5. Chroma Phase (Hué) Setting (HUE)
1. Move the cursor to the HUE parameter.
2. While observing the vectorscope or color video
monitor, move the "I" cursor to adjust the hue
(chroma phase) level.
-35-